Toshiba TDP-T250U Kullanıcı El Kitabı - Sayfa 22
Projektör Toshiba TDP-T250U için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Toshiba TDP-T250U 31 sayfaları. Tdp-t250u user's guide
Using the menus (Continued)
[Background]
• TOSHIBA is set for [Logo] by factory setting.
• If user's logo has been registered, it is displayed when [Logo] is set for
background.
[Start-up screen]
If user's logo has been registered and this setting is [On], the logo is displayed at
start-up.
[User logo]
Registers a part of the image that is input from computer and displays it as a logo
at start-up and when no signal is input.
<How to register logo>
Register user logo
1
Select [User logo] in the Display setting menu, and press the
button.
2
Select <Register user logo> from the displayed menu list and press
the
button.
3
The register confirmation screen appears. Select [OK] or [Cancel] and
press the
button.
4
The image quality mode selection screen appears. Select [Normal] or
[Compressed] mode and press the
[Normal]:
Higher quality, though more time-consuming to register or display
the image
[Compressed]: Slight quality degradation, but less time-consuming to register or
display the image
5
Registration starts.
• A message is displayed while registration is in process.
Notes
• You can register a logo from computer input only.
• You cannot register a whole image.
• Only one logo can be registered. When a new image is registered, the old one is
erased.
• The time needed to register or display the image varies depending on the data size.
• If you use this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
button.
42
<Display mode>
Select the size of the registered logo (except during the PIP and SPLIT modes).
[icon]: Displays the registered image in original size at center of the screen.
アイコン後送
[icon]: Displays the registered image by enlarging fully in the screen.
(As processed digitally, the image quality is degraded.)
<Background color>
Sets background color when [Center] is selected for the logo display mode.
<Preview>
You can preview the registered logo.
<Reset logo>
or
You can reset the registered logo to the factory setting. (The logo set for the start-up
screen and background is reset.)
43