3Com WL-548A Quick Installation Manual - Page 2
Browse online or download pdf Quick Installation Manual for Wireless Access Point 3Com WL-548A. 3Com WL-548A 15 pages.
Print Page
3Com AirProtect Sensor 5750 Features
1
6
7
Feature
1
Antenna
Connectors
2
LEDs
3
Ethernet Port
4
Serial Port
5
Reset Button
6
Kensington lock connector
7
Detachable rear-panel cover
8
Mounting Bracket
2
Description
Two RSMA type antenna connectors allow you to connect antennas
that operate in 2.4 GHz and 5.0 GHz bands.
The LEDs indicate power and activity. See "Checking the LED
Indicators" on page 8 for details.
The Ethernet port provides a 10/100BASE-TX Ethernet connection to a
3Com Wireless LAN switch. The connection can be direct to a 3Com
switch or indirect through an intermediate Layer 2 or Layer 3 network.
Use a standard Category 5 cable with straight-through signaling and
standard RJ-45 connectors to connect the sensor to the switch on the
network.
The serial port is not used for basic sensor operations.
To restore factory settings, press the reset button during power-up by
inserting a pointed object into the reset hole on the back of the sensor
and holding for at least 20 seconds.
The mounting bracket comes attached to the sensor and allows the
unit to be mounted on a wall or ceiling.
3
4
2
1
5
8