3Com WL-548A Manual de instalação rápida - Página 2

Procurar online ou descarregar pdf Manual de instalação rápida para Ponto de acesso sem fios 3Com WL-548A. 3Com WL-548A 15 páginas.

3Com AirProtect Sensor 5750 Features

Feature

Antenna

Connectors

LEDs

Ethernet Port

Serial Port

Reset Button

Kensington lock connector

Detachable rear-panel cover

Mounting Bracket

Description

Two RSMA type antenna connectors allow you to connect antennas

that operate in 2.4 GHz and 5.0 GHz bands.

The LEDs indicate power and activity. See "Checking the LED

Indicators" on page 8 for details.

The Ethernet port provides a 10/100BASE-TX Ethernet connection to a

3Com Wireless LAN switch. The connection can be direct to a 3Com

switch or indirect through an intermediate Layer 2 or Layer 3 network.

Use a standard Category 5 cable with straight-through signaling and

standard RJ-45 connectors to connect the sensor to the switch on the

network.

The serial port is not used for basic sensor operations.

To restore factory settings, press the reset button during power-up by

inserting a pointed object into the reset hole on the back of the sensor

and holding for at least 20 seconds.

The mounting bracket comes attached to the sensor and allows the

unit to be mounted on a wall or ceiling.