Pioneer X-HX33 Operating Instruction - Page 20
Browse online or download pdf Operating Instruction for Receiver Pioneer X-HX33. Pioneer X-HX33 36 pages. Cd/receiver system
Print Page
Listening to CDs
You can program the tracks in any
order you like.
+ / – button
38 button
CANCEL button
ENTER button
MODE button
MODE button
Programmed play
Play your favorite tracks in your favorite order
with programmed play.
A sequence of up to 32 tracks can be
programmed, with tracks appearing more than
once in the sequence, if you like.
1
During Stop mode, press the MODE
button until "PROGRAM" appears in
the display panel.
+ / – buttons
ENTER button
2
Use the + or – button to select the first
track to play, then press the ENTER
button. Repeat this for the second
track to be played, the third track, and
so on.
Track number
Order of track during pro-
grammed play
'
If you select the wrong track, press the
CANCEL button to clear the most recent
track selection.
If you press and hold the CANCEL button for
at least three seconds, all selected tracks are
cleared.
The total programmed playing time is not displayed
if it exceeds 256 minutes.
3
After selecting the last programmed
track, press the 38 button.
When programmed play ends
When programmed play of all selected tracks
ends, playback resumes with the first pro-
grammed track.
Any of the following actions will clear the
programmed tracks
• Removing the CD
• Pressing the MODE button to switch to another mode,
such as repeat playback of one track
• Switching to another audio source by pressing the
SOURCE button
Programmed play selections will not be cleared when the
power is shut off, such as when the POWER button or
STANDBY/ON button is pressed.
To check programmed tracks
During Stop mode, press the + button to display the track
numbers of the programmed tracks in the programmed
order.
The total playing time of
all programmed tracks is
automatically displayed.