Pioneer AVH-A100DVD Operation Manual - Page 11
Browse online or download pdf Operation Manual for Stereo Receiver Pioneer AVH-A100DVD. Pioneer AVH-A100DVD 30 pages. Dvd rds av receiver
Print Page
Recalls the preset channel stored to a key from memory.
Stores the current broadcast frequency to a key.
Displays the preset channel list.
Select an item on the list ([1] to [6]) to switch to the preset channel.
Selects the FM1, FM2, FM3, MW, or LW band.
Performs BSM (best stations memory) function (page 11).
Manual tuning
Seek tuning or non stop seek tuning
Releasing the key in a few seconds skips to the nearest station from the
current frequency. Keep holding the key for long seconds to perform,
performs non stop seek tuning.
Storing the strongest broadcast frequencies (BSM)
The BSM (best stations memory) function automatically stores the six strongest
broadcast frequencies under the preset channel keys [1] to [6].
NOTES
• Storing broadcast frequencies with BSM may replace those you have already saved.
• Previously stored broadcast frequencies may remain stored if the number of frequencies stored has
not reached the limit.
1
Touch
to begin search.
While searching, the six strongest broadcast frequencies will be stored under the
preset channel keys in the order of their signal strength.
To cancel the storage process
1
Touch [Cancel].
Radio settings
1
Press
.
2
Touch
then
.
The system setting screen appears.
3
Touch [AV Source Settings].
4
Touch [Radio settings].
The menu items vary according to the source.
Menu Item
[Local]
[Off]
FM: [Level1] [Level2] [Level3] [Level4]
MW/LW: [Level1] [Level2]
[FM Step]
[100kHz] [50kHz]
[Regional]*
[On] [Off]
[Alternative FREQ]*
[On] [Off]
[Auto PI]
[On] [Off]
[TA Interrupt]*
[On] [Off]
[News Interrupt]*
[On] [Off]
[Tuner Sound]*
[Music]
[Talk]
[Standard]
* This function is available only when you receive the FM band.
Description
Local seek tuning allows you to only tune into
radio stations with sufficiently strong signals.
NOTE
[Level4] for FM and [Level2] for MW/LW are available
only with the stations with the strongest signals.
Select the seek tuning step for the FM band.
NOTE
The tuning step remains at [50kHz] during manual
tuning.
Switches whether the area code is checked
during the Auto PI search.
Allow the unit to retune to a different frequency
providing the same station.
Searches for the same PI (Programme
Identification) code broadcast station from all
frequency bands automatically when the
broadcasting station contains RDS data.
NOTE
Even if you set to [Off], the PI search is automatically
performed when the tuner cannot get a good
reception.
Receives the traffic announcement from the last
selected frequency, interrupting the other
sources.
Interrupt the currently selected source with
news programmes.
Switches the sound quality of the FM tuner.
Gives priority to the sound quality.
Gives priority to noise prevention.
Gives no effect.
11
En