Pioneer AVH-A100DVD Kullanım Kılavuzu - Sayfa 11

Stereo Alıcı Pioneer AVH-A100DVD için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Pioneer AVH-A100DVD 30 sayfaları. Dvd rds av receiver

Sayfayı Yazdır

Recalls the preset channel stored to a key from memory.

Stores the current broadcast frequency to a key.

Displays the preset channel list.

Select an item on the list ([1] to [6]) to switch to the preset channel.

Selects the FM1, FM2, FM3, MW, or LW band.

Performs BSM (best stations memory) function (page 11).

Manual tuning

Seek tuning or non stop seek tuning

Releasing the key in a few seconds skips to the nearest station from the

current frequency. Keep holding the key for long seconds to perform,

performs non stop seek tuning.

Storing the strongest broadcast frequencies (BSM)

The BSM (best stations memory) function automatically stores the six strongest

broadcast frequencies under the preset channel keys [1] to [6].

NOTES

• Storing broadcast frequencies with BSM may replace those you have already saved.

• Previously stored broadcast frequencies may remain stored if the number of frequencies stored has

not reached the limit.

Touch

to begin search.

While searching, the six strongest broadcast frequencies will be stored under the

preset channel keys in the order of their signal strength.

To cancel the storage process

Touch [Cancel].

Radio settings

Press

Touch

then

The system setting screen appears.

Touch [AV Source Settings].

Touch [Radio settings].

The menu items vary according to the source.

Menu Item

[Local]

[Off]

FM: [Level1] [Level2] [Level3] [Level4]

MW/LW: [Level1] [Level2]

[FM Step]

[100kHz] [50kHz]

[Regional]*

[On] [Off]

[Alternative FREQ]*

[On] [Off]

[Auto PI]

[On] [Off]

[TA Interrupt]*

[On] [Off]

[News Interrupt]*

[On] [Off]

[Tuner Sound]*

[Music]

[Talk]

[Standard]

* This function is available only when you receive the FM band.

Description

Local seek tuning allows you to only tune into

radio stations with sufficiently strong signals.

NOTE

[Level4] for FM and [Level2] for MW/LW are available

only with the stations with the strongest signals.

Select the seek tuning step for the FM band.

NOTE

The tuning step remains at [50kHz] during manual

tuning.

Switches whether the area code is checked

during the Auto PI search.

Allow the unit to retune to a different frequency

providing the same station.

Searches for the same PI (Programme

Identification) code broadcast station from all

frequency bands automatically when the

broadcasting station contains RDS data.

NOTE

Even if you set to [Off], the PI search is automatically

performed when the tuner cannot get a good

reception.

Receives the traffic announcement from the last

selected frequency, interrupting the other

sources.

Interrupt the currently selected source with

news programmes.

Switches the sound quality of the FM tuner.

Gives priority to the sound quality.

Gives priority to noise prevention.

Gives no effect.