Pioneer CDJ-700S Operating Instructions Manual - Page 10
Browse online or download pdf Operating Instructions Manual for CD Player Pioneer CDJ-700S. Pioneer CDJ-700S 16 pages.
Print Page
BASIC OPERATION II
DJ PLAYER OPERATIONS
TIME MODE/AUTO CUE
D
PROFESSIONAL
'
•
TIME
AUTO
MODE
CUE
TRACK SEARCH
IN/REALTIME CUE
4
¢
SEARCH
OUT ADJUST
1
¡
CUE
CUE
–
PLAY/PAUSE
REV
6
4
PLAY/PAUSE
Playback Operations with Auto Cue
Function ON
These represent basic playback operations when the auto
cue function is on (the display's AUTO CUE indicator is
lit).
1. Press the OPEN button.
2. Load a compact disc.
÷ Set the disc in the center of the tray with the label
side up.
÷ When loading an 8-cm (3-inch) disc, set the disc in
the groove in the very center of the tray.
÷ Load only one disc at a time.
3. Press the front of the disc door to close.
4. Press the PLAY/PAUSE button (6).
÷ Press this button only after the cue indicator (CUE)
is lit. Playback will begin immediately.
7 When playback of one track ends, the player advances
to cue the beginning of the next track and enters the
standby mode. The cue indicator (CUE) lights, and the
6 indicator flashes indicating the unit is in playback
standby mode. When the PLAY/PAUSE button (6) is
pressed, the cued track will playback immediately.
Cueing by Frames
7 Jog dial
During playback, press the PLAY/PAUSE button (6)
to enter standby mode, then rotate the jog dial to
cue by frame.
÷ Cueing is performed in increments of single frames
by rotating the jog dial.
÷ When the jog dial is rotated clockwise, the player
cues forward; rotate counterclockwise to cue in the
reverse direction.
÷ When the jog dial is turned at a speed of about 1
rotation per second, normal playback sound will
be produced (75 frames = 1 second).
7 Operation using the SEARCH buttons
With the unit in the standby mode, press one of the
SEARCH buttons (1, ¡ ).
÷ Each time the button is pressed, the disc will move
one frame in the indicated direction.
10
<DRB1215>
En
CDJ-700S
COMPACT DISC PLAYER
TEMPO
±10/±16
OPEN
MASTER
TEMPO
1
OUT/EXIT
RELOOP
OPEN
LOOP
+
FWD
2,3
TEMPO
D
PROFESSIONAL
'
•
TIME
AUTO
MODE
CUE
TRACK SEARCH
IN/REALTIME CUE
OUT/EXIT
4
¢
SEARCH
OUT ADJUST
1
¡
CUE
CUE
3
–
PLAY/PAUSE
REV
6
1
PLAY/PAUSE
Jog dial
Setting a Cue Point
Once a cue point is recorded in the memory, pressing
the CUE button causes the unit to enter the playback
standby mode at the cue point.
1. During playback, when the disc comes to the
point you wish to cue, press the PLAY/PAUSE
button (6) to enter standby mode.
2. Rotate the jog dial to search for the desired
location.
÷ To set the cue point while listening to the sound,
use the jog dial to return the disc to a point just
before the point at which you wish to begin play-
back from the cue. (The cue point is that point im-
mediately after the sound heard in the audible
pause mode. )
3. When the frame number or the audible sound
reaches the desired cueing point, press the
CUE button.
÷ When the sound is muted and the cue indicator
(CUE) lights, the cue point has been stored in
memory.
÷ Each time a new cue point is stored in memory,
any previously stored cue point is erased.
CDJ-700S
COMPACT DISC PLAYER
TEMPO
±10/±16
MASTER
TEMPO
RELOOP
OPEN
LOOP
2
+
FWD
TEMPO