Pioneer CLD-DS04 Operating Instructions Manual - Page 4

Browse online or download pdf Operating Instructions Manual for CD Player Pioneer CLD-DS04. Pioneer CLD-DS04 30 pages. Cd cdv ld player

Print Page

Pioneer CLD-DS04 Operating Instructions Manual

PRECAUTIONS

If it becomes

necessary

to transport

or ship this unit in the

future, be sure to first remove the disc (if loaded), and retract

the disc table to its closed position.

Then turn the power off,

and, after the "OFF" display stops blinking on the display, dis-

connect the power cord.

When FM or AM stations are being received, signal noise may be

generated

if the player is turned on. Turn off the player when not

in use. Also, if there is signal noise when receiving radio stations

with

an indoor antenna,

adjust the position

or direction

of the

antenna.

INSTALLING

THE PLAYER

•

Place the player on a stable platform next to the television

and

stereo system to be used with the player.

•

Do not place heavy objects

such as a television

or TV monitor

on top of the player.

•

Do not place the player on top of your TV set or TV monitor.

Also, keep the player away from devices such as cassette decks

which are sensitive to magnetic fields.

NOT

INSTALL

THE

PLAYER

IN THE

FOLLOWING

LOCATIONS

•

In a place subject to direct sunlight.

•

In humid or poorly ventilated places.

•

In extremely

hot or cold places.

•

In a place subject to vibrations.

•

In a dusty place.

•

In a place subject to soot, steam or heat (in a kitchen, etc.)

AVOID

SOURCES

OF HEAT

Do not put the player on sources

of heat, such as an amplifier.

When installing

with audio components

that generate

heat, by

placing the player below

such components

where there is ade-

quate ventilation

and not much dust. Avoid placing the player on

surfaces such as shaggy carpets, beds, and sofas which may block

ventilation

under the player and cause damage.

CAUTION

Even when the player is in the pause mode, the disc-drive motor is

still revolving. Since leaving the player in this condition can shorten

the lifetime

of the motor, do not leave the player in the pause

mode for long periods of time. Also, to prevent

damage to the

screen, do not use the unit for long periods of time under condi-

tions in which the screen display (monitor) is displaying characters

(for example,

power-ON mode, CD PLAYER, PAUSE) With an LD

disc, if playback

is paused for about 20 minutes,

the player will

automatically

enter stop mode.

STRIPE

PATTERNS

APPEARING

ON A TV PROGRAM

Stripe patterns may appear during a TV program if the player unit is

turned on, depending on the quality of reception of the TV station.

This is neither

a malfunction

of the television

nor the player. If

stripes appear while watching

the TV, or whin watching

the TV for

long periods of time, turn the player off.

CONDENSATION

Moisture

will form in the operating

section of the player if the

player is brought from cool surroundings

into a warm room or

if the temperature

of the room rises suddenly. When this hap-

pens, player's performance

will be impaired.

To prevent

this, let the player stand in its new •urroundings

for about an hour before switching

it on, or make sure that

the room temperature

rises gradually.

Condensation

may also form during the summer

if the player is

exposed

to the breeze from

an air conditioner.

In such cases,

change the location of the player.

POWER-CORD

CAUTION

Handle the power cord by the plug. Do not pull out the plug by

tugging the cord and never touch the power cord when your hands

are wet as this could cause a short circuit or electric shock. Do not

place the unit, a piece of furniture,

etc., on the power cord, or

pinch the cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed in such a way that they

are not likely to be stepped on. A damaged power cord can cause

a fire or give you an electrical shock. Check the power cord once in

a while.

When you find it damaged,

ask your nearest

PIONEER

authorized service center or your dealer for a replacement.

I CLEANING CARE I

Use a soft, dry cloth for cleaning. For stubborn dirt, soak the cloth

in a weak detergent

solution; wring well first and wipe. Use a dry

cloth to wipe it dry. Do not use any volatile agents such as benzine

or paint thinner, as they may damage the surface of the player.

Abnormal functioning

of this unit may be caused by static

electricity

or other external interference.

To restore normal

operation,

unplug

the AC power

cord and then plug it in

again.

Only one disc can be loaded at any one time. Loading a Laser-

Disc, a Compact Disc, a 3-inch (8-cm) Compact Disc or a Com-

pact Disc with Video on top of one another may result in a

breakdown,

or in scratching of the di•cs. Please only load one

disc at a time.

This player

is to be used exclu•ively

with

the NTSC color

system. Plea•e use an NTSC LaserDisc only. PAL and SECAM

system discs cannot be used with this player.