Acom 1000 Installation

Browse online or download pdf Installation for Amplifier Acom 1000. Acom 1000 3 pages.

Print Page

ACOM1000 TOP COVER REMOVAL and INSTALLATION

SAFETY FIRST!

W A R N I N G

HIGH VOLTAGE!

===========================

The amplifier works with high voltages up to

3000V

which

is LETHAL!

For your

safety pull the amplifier power plug out of the mains wall outlet and WAIT AT

LEAST 30minutes EACH TIME BEFORE you remove the cover of the amplifier.

Disconnect all cables from the amplifier (grounding last). Do not touch any

part inside while the amplifier is open because some residual voltages may

still be present!

1. Removing the top cover.

Using a Philips-2 screwdriver, unscrew 9 pcs of "eco-fix" flange-button head

screws to release the top cover (2x3 pcs on each bottom-side edge, and three

more on the rear-top edge of the box). Don't unscrew four screws that hold the

grid above the tube.

Lift the rear edge of the cover slightly (to 2-3cm) and then pull the cover

backwards, in order to release it from front-panel's chutes. Remove the top

cover.