Whirlpool 859991537390 User Manual - Page 10
Browse online or download pdf User Manual for Washer Whirlpool 859991537390. Whirlpool 859991537390 19 pages.
Print Page
5. Add detergent
Pull out the detergent dispenser and add
detergent (and additives/softener) into the relative
compartments as described in section "DETERGENT
DISPENSER". Observe the dosing recommendations
on the detergent pack.
Correct dosing of detergent / additives is important, because:
• it optimizes the cleaning result
• it avoids irritating residues of surplus detergent in your
laundry
• it saves money by avoiding waste of surplus detergent
• it protects the washing machine by avoiding
calci cation of components
• it respects the environment by avoiding unnecessary
environmental burden.
6. Delaying the start of a programme
• To set a programme to start at a later time, see the
section "OPTIONS/ START DELAY"
7. Start programme
• Press the "Start/Pause"
illuminates, the door locks and the "Door locked"
indicator lights up.
• To avoid over ow, do not open the detergent
dispenser during a running programme anymore.
• The remaining programme duration can vary. Factors
like unbalance in the wash load, or foam formation, can
have an e ect on the programme duration.
8. Change the settings of a running programme, if
needed
You can still change the settings while a programme is
running. The changes will be applied, provided the respective
programme phase has not nished yet.
To change the settings of a running programme:
• Press "Start/Pause"
on pause.
• Change your settings.
• Press "Start/Pause"
programme.
If you have changed the programme, do not add detergent
for the new programme.
To prevent that a running programme is changed by accident
(for instance by children), use the "Key lock"
"FUNCTIONS").
Pause a running programme and open the door, if
needed
• Press "Start/Pause"
• Provided water level or temperature is not too high,
the "Door locked"
open the door, for example to add more laundry, or to
remove laundry which was loaded by mistake.
• Press "Start/Pause"
programme.
9. Cancelling a running programme, if needed
• Press and hold the "ON/OFF"
washing machine stops.
• If the water level and temperature are low enough, the
door unlocks and may be opened.
• The door remains locked if there is water in the drum.
To unlock the door, switch the washing machine on,
select the "Spin & Drain"
spin option o by setting the spin speed to "0".
• The water is emptied and the door unlocks at the end
of the programme.
10
. The relative indicator lamp
to put the running programme
again to continue the
(see section
to pause a running programme.
indicator light turns o . You can
to proceed with the
button until the
programme and turn the
10. Switch o the washing machine after programme End
• At the end of the cycle, the message "END" is shown on
the display.
• The door can only be opened when the symbol "Door
locked"
light turns o .
• Check that the "Door locked"
open the door and take out the laundry.
• Press "ON/OFF"
To save energy, if the washing machine is not switched
o manually with the button, it turns o automatically
approximately 30 minutes after the end of the programme.
Leave the door ajar to let the interior of the washing
machine to dry.
User manual
indicator is o , then
to switch the washing machine o .