Whirlpool 36'' Freestanding Gas Range Installation Instructions And Use & Care Manual - Page 11

Browse online or download pdf Installation Instructions And Use & Care Manual for Ventilation Hood Whirlpool 36'' Freestanding Gas Range. Whirlpool 36'' Freestanding Gas Range 28 pages. 30" and 36" gas sealed burner cooktop
Also for Whirlpool 36'' Freestanding Gas Range: Installation Instructions Manual (13 pages), Installation Instructions Manual (10 pages), Installation Instructions Manual (7 pages), Installation Instructions Manual (7 pages), Installation Instructions Manual (28 pages), Installation Instructions Manual (6 pages), Installation Instructions Manual (7 pages), Installation Instructions (5 pages)

Print Page
Whirlpool 36'' Freestanding Gas Range Installation Instructions And Use & Care Manual
Replacing the Incandescent Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect power.
2. Squeeze the plastic lens cover and remove it from the hood.

WIRING DIAGRAM

Motor Switch
Off - On
NOTE: Speed 1
not used
C25
Motor Characteristics
Power Supply
120 VAC
Frequency
60 Hz
Amperage
1.2 ±10% A
Wattage Rating
73 ±10% Watts
Motor Resistance
White - Red
17.1 ±10% Ohms
White - Black
13.6 ±10% Ohms
3. Screw a 120V, 75W maximum, incandescent light bulb with
E26 base into the socket.
4. Replace the lens cover by squeezing the cover and inserting
the tabs into the slots.
5. Reconnect power.
If the new light does not operate, make sure the light bulb is
inserted correctly before calling service.
Lamp Switch
Off - Low - High
1
2
Lamp Switch
1 - 2
1 - 3 Low
L
3
1 - L High
Rectifier
Diode
Ground
Screw
SE114A
N
L
GND
Operation
Off
11