Whirlpool UXD8630DYS Installation Use & Care Instructions - Page 15

Browse online or download pdf Installation Use & Care Instructions for Ventilation Hood Whirlpool UXD8630DYS. Whirlpool UXD8630DYS 40 pages. 30 76.2 cm and 36 91.4 cm retractable pop-up downdraft vent system
Also for Whirlpool UXD8630DYS: Installation Instructions And Use & Care Manual (36 pages), Installation Instructions And Use & Care Manual (44 pages)

Print Page

5. Install the left and right undercounter mounting brackets to

the vent box. Slide the keyhole slots over the guide tabs and

push the brackets up to set them in place.

A. Vent box

B. Undercounter mounting bracket

C. Keyhole slots

D. Guide tabs

6. Drill two pilot holes through each of the undercounter

mounting brackets into the underside of the countertop. Using

two screws (not provided) of the appropriate length, mount the

brackets to the countertop.

IMPORTANT: Select a screw length that will not allow the

screws to go through the countertop when tightened.

A. Screws

B. Backsplash

C. Countertop

7. Check that the downdraft vent is level as shown below.

Loosen the lower support leg screws and position the

legs against the cabinet floor.

A. Downdraft

B. Level

8. Fasten the lower support legs to the cabinet floor with

screws (not provided).

A. Screw (not provided)

9. Tighten the lower support leg screws.

10. Attach the left and right end caps to the vent box. Place the

tab into the mounting slot at each end of the downdraft vent,

as shown, and push down to lock into place.

A. End cap tab

B. Mounting slot