Whirlpool UXT4030AY Installation Instructions And Use & Care Manual - Page 9
Browse online or download pdf Installation Instructions And Use & Care Manual for Ventilation Hood Whirlpool UXT4030AY. Whirlpool UXT4030AY 24 pages. 30" (76.2 cm) and 36" (91.4 cm) range hood
Also for Whirlpool UXT4030AY: Installation Instructions And Use And Care Manual (32 pages), Installation Instructions And Use & Care Manual (36 pages)
Print Page
Replacing the Incandescent Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect power.
2. Squeeze the plastic lens cover and remove it from the hood.
A. Light bulb socket
B. Lens cover
B
A
WIRING DIAGRAM
Light Switch
On - Off
SE113B
BK
W
Motor Characteristics
Power Supply
120 VAC
Frequency
60 Hz
Amperage
0.35 ±10% A
Wattage Rating
21 ±10% Watts
Motor Resistance
46.9 ±10% Ohms
White - Red
37.2 ±10% Ohms
White - Black
3. Screw light bulb into socket.
4. Replace lens cover by squeezing cover and inserting tabs
into slots.
5. Reconnect power.
If new light does not operate, make sure the lamp is inserted
correctly before calling service.
Motor Switch
Low - Off - High
BK
C10
N
L
Ground
Screw
GND
9