Alcohawk AlcoHawk PT500P Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Test Equipment Alcohawk AlcoHawk PT500P. Alcohawk AlcoHawk PT500P 14 pages.
Also for Alcohawk AlcoHawk PT500P: Owner's Manual (16 pages)

Print Page

Wait 20 minutes after the subject smokes, eats or drinks before

testing. Failure to wait 20 minutes can give inaccurate BAC read-

ings and harm the sensor.

Step 1) Press and hold the ON/OFF power button

you hear a BEEP. The unit reads "Initializing..." as it prepares

for use.

Step 2) The screen displays "Test" and "Options". To start a "Test",

press the ENTER button

"Take a Deep Breath" for three (3) seconds, beeps and then

displays "Blow Now". Take a deep breath, wrap your lips

around the new mouthpiece and blow steadily for five (5) sec-

onds. The unit takes the breath sample in the amount of time

set for a breath sample (factory default is 5 seconds). Do not

cover the BREATH OUT hole.

Note: Begin blowing immediately when "Blow Now" is displayed to

get a deep lung sample.

Step 3) The unit displays "Processing" while analyzing the sample.

After about three (3) seconds, the unit then displays the

estimated BAC.

Step 4) The unit displays "Print" at the bottom of the screen. Press

the ENTER

results wirelessly to the AlcoHAWK

separately).

Step 5) The unit shows the test result for 90 seconds before beeping

twice and shutting off.

OPERATION

for 2-3 seconds. The unit displays

button to print the test result. This will send the

for 1 second until

PT Wireless Printer (sold