Alcohawk AlcoHawk PT500P Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Test Equipment Alcohawk AlcoHawk PT500P. Alcohawk AlcoHawk PT500P 14 pages.
Also for Alcohawk AlcoHawk PT500P: Owner's Manual (16 pages)

Print Page

When the screen displays "Test" and "Options", press the SELECT

button

to view the menu options. Use the SELECT button

down through the menu options. Use the ENTER button

selected menu option.

Test Counter

To read the number of tests that have been performed since the last

time the unit was calibrated, press the SELECT button

menu options. The first option on the list is TEST COUNTER. It should

be highlighted. Press the ENTER button

be displayed. If the number reads 200 or greater, we recommend send-

ing the unit in for recalibration (see Calibration, pg. 10).

Alarm Point

The unit will read "High" if the BAC reading exceeds the alarm point set-

ting. The default setting is 0.020% BAC. You can change the alarm point

from between 0.020%-0.080% BAC.

To change the setting press the SELECT button

the desired value on the screen. Press the ENTER button

setting.

Temperature Scale

You can switch between Celsius (C) and Fahrenheit (F) for the tempera-

ture sensor. The default setting is Fahrenheit (F).

To change the setting press the SELECT button

the desired scale. Press the ENTER button

Convert Units

You can change the unit of alcohol concentration shown for tests. You

can choose between %BAC (U.S.A), g/L, or % º BAC. The default setting

is %BAC (U.S.A) (the U.S.A standard).

To change the setting press the SELECT button

the desired conversion. Press the ENTER button

MENU OPTIONS

and the number of tests will

until the unit shows

to save the setting.

until the unit shows

to save the setting.

to move

to enter the

to view the

to save the