3Com AirProtect Sentry 5850 Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Network Hardware 3Com AirProtect Sentry 5850. 3Com AirProtect Sentry 5850 15 pages. Secure converged networks enterprise edition
Also for 3Com AirProtect Sentry 5850: Datasheet (4 pages), Product Manual (15 pages)
Print Page
3Com AirProtect Sentry 5850 Features
1
6
7
Feature
1
Antenna
Connectors
2
LEDs
3
Ethernet Port
4
Serial Port
5
Reset Button
6
Kensington lock connector
7
Detachable rear-panel cover
8
Mounting Bracket
2
Description
Two RSMA type antenna connectors allow you to connect antennas
that operate in 2.4 GHz and 5.0 GHz bands.
The LEDs indicate power and activity. See "Checking the LED
Indicators" on page 7 for details.
The Ethernet port provides a 10/100BASE-TX Ethernet connection to a
3Com switch. Use a suitable Category 5 cable with straight-through
signaling and standard RJ-45 connectors to connect your Sentry to the
switch on the network.
Provides a serial interface to the Sentry for diagnostic use.
To restore factory settings, press the reset button during power-up by
inserting a pointed object into the reset hole on the back of the Sentry
and holding for five seconds.
The mounting bracket comes attached to the Sentry and allows the
unit to be mounted on a wall or ceiling.
3
4
2
1
5
8