ALCON CT-88 Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Accessories ALCON CT-88. ALCON CT-88 9 pages.

Remote/ Mobile unit
NOTE :
"
When the distance between Remote/ Mobile unit and Base unit is too far, the INT indicator
will flash several times without ringing.

TRANSFERRING CALLS

From Base Unit to Remote/Mobile (only if you have a Normal Telephone Connected to the Base
Unit that has the "hold" function)
Base Unit
It is necessary to connect a normal telephone that has the "hold" function to the Base Unit
11
1. The Remote/ Mobile unit will ring.
The INT indicator will flash. This means
that the Base unit is calling the Remote
/ Mobile unit.
2. Once you lift the telephone handset,
you can begin you conversation .
The INT indicator will continuously
illminate.
3. To finish the conversation, press
CALL or hang up the telephone hand-
set of Remote/ Mobile unit.
1. An incoming call comes into the sys-
tem.
Press HOLD on the normal telephone.
The call will be put on hold automatical-
ly.
2. Select the Remote/Mobile
you wish to communicate with by press
ing the SELECT button and then press
INT. Tell the person at the Remote /
Mobile that he has an incoming The
person on the Remote /Mobile will hang
up and then answer again. In the
meantime, the person on the Base will
take the person off of hold and the call
will automatically be transferred to the
Remote Unit.
Remote/Mobile

TEMPORARY TONE DIALING

If your home is equipped with pulse dialing and your telephone is set to the pulse mode, you
can still change it to the tone dialing mode temporarily. This allows you to access special servic-
es available to tone systems (e.g., electronic banking systems and remote-control answering
machines).
NOTE:
" The telephone will stay in the tone mode until the call ends, then it will returns to the pulse
mode automatically.
3. Hang up the normal telephone to deac-
tivate the INT and then pick up the
handset again to get the outside call.
4. You will now be able to answer the call
that is on hold.
1. Dial the number you want to call.
2. When your call goes through, press * .
12