ALCON CT-88 Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Acessórios ALCON CT-88. ALCON CT-88 9 páginas.

Imprimir página

Remote/ Mobile unit

NOTE :

When the distance between Remote/ Mobile unit and Base unit is too far, the INT indicator

will flash several times without ringing.

TRANSFERRING CALLS

From Base Unit to Remote/Mobile (only if you have a Normal Telephone Connected to the Base

Unit that has the "hold" function)

Base Unit

It is necessary to connect a normal telephone that has the "hold" function to the Base Unit

1. The Remote/ Mobile unit will ring.

The INT indicator will flash. This means

that the Base unit is calling the Remote

/ Mobile unit.

2. Once you lift the telephone handset,

you can begin you conversation .

The INT indicator will continuously

illminate.

3. To finish the conversation, press

CALL or hang up the telephone hand-

set of Remote/ Mobile unit.

1. An incoming call comes into the sys-

tem.

Press HOLD on the normal telephone.

The call will be put on hold automatical-

ly.

2. Select the Remote/Mobile

you wish to communicate with by press

ing the SELECT button and then press

INT. Tell the person at the Remote /

Mobile that he has an incoming The

person on the Remote /Mobile will hang

up and then answer again. In the

meantime, the person on the Base will

take the person off of hold and the call

will automatically be transferred to the

Remote Unit.

Remote/Mobile

TEMPORARY TONE DIALING

If your home is equipped with pulse dialing and your telephone is set to the pulse mode, you

can still change it to the tone dialing mode temporarily. This allows you to access special servic-

es available to tone systems (e.g., electronic banking systems and remote-control answering

machines).

NOTE:

" The telephone will stay in the tone mode until the call ends, then it will returns to the pulse

mode automatically.

3. Hang up the normal telephone to deac-

tivate the INT and then pick up the

handset again to get the outside call.

4. You will now be able to answer the call

that is on hold.

1. Dial the number you want to call.

2. When your call goes through, press * .