ALCON CT-88 Manual do Proprietário - Página 5

Procurar online ou descarregar pdf Manual do Proprietário para Acessórios ALCON CT-88. ALCON CT-88 9 páginas.

Imprimir página

INTERCOM FUNCTION

{BETWEEN REMOTE/ MOBILE UNIT AND BASE UNIT}

A : Remote / Mobile CALLING BASE UNIT

Remote / Mobile

Note :

If you press INTERCOM without picking up the handset of the nor-

mal telephone and the Base unit user picks up their handset, the

Remote/Mobile unit will emit a quick beeping sound.

1. Press INTERCOM. The base will emit

two short "beeps".

The Remote/Mobile unit INT indicator

will begin to flash.

2. The Remote/Mobile will then emit two

short rings and then it will continuous-

ly ring.

Once the Base unit is in use, the INT

indicator will continuously illuminate.

3. Pick-up the Normal Telephone and you

will be automatically linked with the

Base Unit for intercom communication

purposes.

4. Once you are finished your conversa-

tion, just hang up the handset and you

will automatically close the intercom

communication.

Base Unit

1. The Base Unit will ring, wait a few

ring and pickup the normal phone and

begin to talk, when you are finished

handup.

B : BASE CALLING REMOTE / MOBILE UNIT

Base Unit

1. Press the Intercom button on the Base

Unit and wait for somebody at the

remote end to answer.

2. When the somebody answers from the

remote end, communication is auto-

matically established and you can

begin your conversation. Just talk near

the Base Unit since the microphone is

located on the front panel.

3. To finish your intercom conversation, it

is necessary that the Remote/Mobile

Unit hangs up. The Base Unit cannot

hang up during intercom.

4. Pressing the Intercom button twice on

the Base Unit cancels the intercom

function.

5. If you have more than one

Remote/Mobile Unit in your network,

press the Select button to choose

which Remote/Mobile you wish to link

with. Press the Select button to move

from Remote/Mobile 1, 2, 3, or 4.

Once

you

have

selected

the

Remote/Mobile, press the Int button

and only this unit will ring. Use the

same procedures to communicate with

this unit.