ERGODYNE SQUIDS Quick Start Manual

Browse online or download pdf Quick Start Manual for Safety Equipment ERGODYNE SQUIDS. ERGODYNE SQUIDS 2 pages. Tool attachment

Print Page

Para obtener informacion traducida del product

Pour obtenir des informations traduites sur les produits:

INSPECTION

Inspect your tethering system before and after each use. All equipment should be

regularly inspected by a competent person. Ensure the tethering system is properly

attached to the tool and is not damaged. Before each use, check the following:

• Examine all hardware for rust or corrosion, abnormal distortion (twists, bends),

cracks or breaks, or any other damage.

• Examine markings on the product and labels for legibility.

• Inspect the other products (lanyards, anchor attachments, etc.) appropriately in

accordance with their instructions.

• If any part of the tethering system has knowingly been involved in a drop, it

must immediately be taken out of service and replaced. If any tethering system

component fails any part of an inspection, discard and replace the product

immediately.

DISCLAIMER

In no event shall Tenacious Holdings, Inc., be liable for any direct, indirect, punitive,

incidental, special, or consequential damages arising out of, or associated with, the

misuseof Squids® tethering system components (tool lanyards or attachments).

WARRANTY

We stand behind everything we make and guarantee our products to be free of

defects in materials and workmanship to the original purchaser for the product's

lifetime. Damage, abuse, and/or normal wear are not covered. Questions? Call

Ergodyne at +1-651-642-9889 (8 a.m. - 5 p.m. CST) or 800-225-8238.

Rev. 12/22

SQUIDS

TOOL ATTACHMENT

WWW.ERGODYNE.COM // 800 225 8238

For translated product information

ergo.zone/translations