Xerox WorkCentre M118 Quick Setup Manual

Browse online or download pdf Quick Setup Manual for Printer Xerox WorkCentre M118. Xerox WorkCentre M118 5 pages. Drum cartridge remanufacturing
Also for Xerox WorkCentre M118: User Manual (2 pages), Module Manual (2 pages), Quick Installation Card (2 pages), Software Manual (47 pages), Quick Setup Manual (5 pages), Manual (28 pages), Stand Installation Manual (4 pages), Installation Manual (2 pages), Installation Manual (2 pages), Installation Manual (2 pages), Installation Manual (2 pages), Installation Manual (2 pages), Installation Manual (1 pages), Installation Manual (1 pages), Getting Started Manual (25 pages), Evaluator Manual (12 pages), Service Manual (12 pages), Remanufacturing Instructions (14 pages)

Print Page

Network Connection

This guide includes instructions for:

■

Navigating Display Screens

Network Setup Using DHCP

■

Network Setup Using a Static IP Address

■

Verifying Network Setup Using CentreWare Internet Services (CentreWare IS)

This setup guide provides instructions for connecting the Xerox WorkCentre M118/M118i on an Ethernet

TCP/IP network. It includes procedures for setting up the network connection using either of the following

methods:

■

DHCP: Use this method to allow a DHCP server to automatically assign an IP address. This is the factory

default setting.

Static IP address: Use this method to manually assign an IP address provided by the network

■

administrator.

Note

The System Administrator Guide provides detailed instructions for setting up a network connection. If you

are using Novell IPX, refer to the System Administrator Guide for setup procedures.

Before turning on the machine:

■

Confirm that an existing operational network utilizing TCP/IP is available.

■

Confirm that the Ethernet cable is plugged into the machine and is connected to an operational Ethernet

port on the network.

Note

The RJ45 Ethernet cable is not supplied by Xerox.

on page 2

on page 3

Xerox WorkCentre

M118/M118i

701P42575

on page 4