Xerox WorkCentre M118 Quick Setup Manual - Page 3

Browse online or download pdf Quick Setup Manual for Printer Xerox WorkCentre M118. Xerox WorkCentre M118 5 pages. Drum cartridge remanufacturing
Also for Xerox WorkCentre M118: User Manual (2 pages), Module Manual (2 pages), Quick Installation Card (2 pages), Software Manual (47 pages), Quick Setup Manual (5 pages), Manual (28 pages), Stand Installation Manual (4 pages), Installation Manual (2 pages), Installation Manual (2 pages), Installation Manual (2 pages), Installation Manual (2 pages), Installation Manual (2 pages), Installation Manual (1 pages), Installation Manual (1 pages), Getting Started Manual (25 pages), Evaluator Manual (12 pages), Service Manual (12 pages), Remanufacturing Instructions (14 pages)

Print Page
Xerox WorkCentre M118 Quick Setup Manual
Network Setup Using a Static IP Address
When the machine is powered on, it automatically uses DHCP to obtain its network configuration. To use a
static IP address, DHCP must be turned off and the IP address, gateway address, subnet mask, and
DNS Server address must be entered manually.
Pre-requisites for Using a Static IP Address
Before you begin, obtain the following information from your network administrator:
IP Address:
Gateway Address:
Subnet Mask:
DNS Server Address:
Connecting the Machine Using a Static IP Address
1.
Turn on the machine.
2.
When the machine is Ready, press the Log In/Out button.
3.
Press the Select button below the display to select
a.
Use the numeric keypad to enter the Password. The default password is 11111.
b.
Press the Select button to select Confirm.
Turn DHCP Off
1.
Press the Select button to highlight
2.
Press the the Enter button to select Network/Port.
3.
Press the Select button until you see
4.
Select
Get IP
Address, and then press the Enter button.
5.
Select Manual, and then press the Enter button.
6.
Press the Exit button.
Set the IP Address
1.
Press the Select button until you see
2.
If there is an incorrect IP address in the field, press the Clear button to delete the address.
3.
Use the numeric key pad to enter the first number of the IP address, and then press the Right Arrow button
to move to the next field.
4.
Repeat Step 3 to enter the remaining numbers.
5.
Press the Enter button to accept the address.
6.
Press the Exit button.
__________ . __________ . __________ . __________
__________ . __________ . __________ . __________
__________ . __________ . __________ . __________
__________ . __________ . __________ . __________
System
Print
Settings, and then press the Enter button.
TCP/IP Settings
on the display, and then press the Enter button.
IP Address
on the display,, and then press the Enter button.
Xerox WorkCentre M118/M118i
3
Network Setup Using a Static IP Address
Settings.