Xerox ColorQube 9201 Quick User Manual - Page 9

Browse online or download pdf Quick User Manual for All in One Printer Xerox ColorQube 9201. Xerox ColorQube 9201 38 pages. Mfp
Also for Xerox ColorQube 9201: Install And Operation Instructions (14 pages), Evaluator Manual (28 pages), Quick Manual (8 pages), Quick Manual (16 pages), Secure Installation And Operation (12 pages), Secure Installation And Operation (12 pages), How To Make A Copy (9 pages)

Print Page
Xerox ColorQube 9201 Quick User Manual

Power On and Off

1.
To power ON: Press the Power ON/OFF switch on the left side of the
device to switch on the device. Some functions will be ready before
others. The device will be ready to scan in approximately 3 minutes.
2.
To power OFF: Press the Power ON/OFF switch on the left side of the
device. A confirmation screen will appear, touch the Power Down button.
Note:
The device will automatically shut down after 60 seconds if you do
not touch the Power Down button. Power Down will result in the deletion
of any jobs currently in the list. Do not switch on until the device has
completely powered off. Do not physically move the device unless it has
been powered off for more than 30 minutes.
Energy Saver and Quick Restart
The Energy Save button on the control panel can be used for additional power
functions.
Select the Energy Save button on the control panel.
•
If Energy Saver is selected, the device will immediately enter the Power
Saver Mode appropriate to its configuration. If there are any jobs in the
job list, a second screen displays.
To re-activate the device when in this mode, touch a button on the touch
screen or control panel.
•
If Quick Restart is selected and confirmed the device will restart. Any
copy jobs in the job list will be deleted, print jobs in the job list are
recovered.
•
If Cancel is selected the power down options will be cancelled and the
device will be available for use.
ColorQube™ 9201/9202/9203
Quick Use Guide
Power On and Off
9