Xerox Nuvera 100 Planning Manual - Page 27

Browse online or download pdf Planning Manual for Software Xerox Nuvera 100. Xerox Nuvera 100 38 pages. Production system
Also for Xerox Nuvera 100: Specification Sheet (2 pages), Features Manual (34 pages), Planning Manual (22 pages), User Manual (40 pages), Operation Manual (34 pages), Reference Manual (2 pages), Planning Manual (20 pages), Reference Manual (42 pages), Quick Reference (2 pages), Install Manual (2 pages), Supplementary Manual (48 pages), Planning Manual (16 pages), Reference Manual (2 pages), Specifications (2 pages), Hints And Tips Manual (18 pages), Hints And Tips Manual (18 pages), Getting Started Manual (26 pages), Getting Started Manual (30 pages)

Print Page
Xerox Nuvera 100 Planning Manual
C.P. Bourg Document Finisher (BDFx)

System Dependencies and Prerequisites

Configuration Guide

Printer Configurations
IOT
STACKER
Listed below are the dependencies and prerequisites for
installing the BDFx, BCFx and SQEDG module.
•
The printer must be equipped with a Bypass Transport to
enable In-line Finishing.
•
It is highly recommended that the printer is equipped with a
Bourg Sheet Rotator (BSR) to maximize output.
•
Due to the height of the bypass transport on DocuPrint it is
not possible to attach the BCFx without the BSR.
•
Requires a minimum of 2 skipped pitches (3 skipped pitches
with BCF), which results in low productivity with small
booklets. (A3/ 11 x 17 requires only one skipped pitch with or
without the BCF.)
The Configuration Guide contains diagrams over the various
Finishing Solutions that are currently supported.
BYPASS
STACKER
TRANSPORT
4-3
Finisher Configurations
BDFx
BCFx
BDFx
BCFx
BDFx
SQEDG
BSR
BSR
BDFx
BSR
BDFx
SQEDG
BSR
BCFx
BDFx
SQEDG
BDFx
SQEDG
BCFx
BDFx