Xerox Nuvera 100 계획 매뉴얼 - 페이지 27

{카테고리_이름} Xerox Nuvera 100에 대한 계획 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Nuvera 100 38 페이지. Production system
Xerox Nuvera 100에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 기능 설명서 (34 페이지), 계획 매뉴얼 (22 페이지), 사용자 설명서 (40 페이지), 운영 매뉴얼 (34 페이지), 참조 매뉴얼 (2 페이지), 계획 매뉴얼 (20 페이지), 참조 매뉴얼 (42 페이지), 빠른 참조 (2 페이지), 설치 매뉴얼 (2 페이지), 보충 설명서 (48 페이지), 계획 매뉴얼 (16 페이지), 참조 매뉴얼 (2 페이지), 사양 (2 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 시작하기 매뉴얼 (26 페이지), 시작하기 매뉴얼 (30 페이지)

Xerox Nuvera 100 계획 매뉴얼
C.P. Bourg Document Finisher (BDFx)

System Dependencies and Prerequisites

Configuration Guide

Printer Configurations
IOT
STACKER
Listed below are the dependencies and prerequisites for
installing the BDFx, BCFx and SQEDG module.
The printer must be equipped with a Bypass Transport to
enable In-line Finishing.
It is highly recommended that the printer is equipped with a
Bourg Sheet Rotator (BSR) to maximize output.
Due to the height of the bypass transport on DocuPrint it is
not possible to attach the BCFx without the BSR.
Requires a minimum of 2 skipped pitches (3 skipped pitches
with BCF), which results in low productivity with small
booklets. (A3/ 11 x 17 requires only one skipped pitch with or
without the BCF.)
The Configuration Guide contains diagrams over the various
Finishing Solutions that are currently supported.
BYPASS
STACKER
TRANSPORT
4-3
Finisher Configurations
BDFx
BCFx
BDFx
BCFx
BDFx
SQEDG
BSR
BSR
BDFx
BSR
BDFx
SQEDG
BSR
BCFx
BDFx
SQEDG
BDFx
SQEDG
BCFx
BDFx