Xerox Nuvera 100 Hints And Tips Manual - Page 9

Browse online or download pdf Hints And Tips Manual for Software Xerox Nuvera 100. Xerox Nuvera 100 18 pages. Production system
Also for Xerox Nuvera 100: Specification Sheet (2 pages), Features Manual (34 pages), Planning Manual (22 pages), User Manual (40 pages), Operation Manual (34 pages), Reference Manual (2 pages), Planning Manual (20 pages), Reference Manual (42 pages), Quick Reference (2 pages), Install Manual (2 pages), Supplementary Manual (48 pages), Planning Manual (38 pages), Planning Manual (16 pages), Reference Manual (2 pages), Specifications (2 pages), Hints And Tips Manual (18 pages), Getting Started Manual (26 pages), Getting Started Manual (30 pages)

Print Page

New Capabilities in

Version 10.2

Software

The following is a list of new capabilities enabled with version 10.2 software:

1. The Xerox Tape Binder (XTB) is now configurable in Dual Mode (2 XTB's connected

together).

2. Disable status messages when trays are disabled. This de-clutters the status message area

when a tray is disabled.

3. Add a custom edge erase feature that can set the edge erase in the range of 0 mm to 6

mm for each of the four edges.

4. Added the ability to disable/enable a stacker (on DS3500 or BFM). This allows the user to

disable a stacker if they want to restrict jobs from going to that stacker and then re-enable

later.

5. Enable both top trays for purge events on systems with 2 top trays. This will improve

purge effectiveness.

6. Improved jam clearance by adding additional areas that can be purged to the 5B area.

7. Added several new Finisher profiles to the catalog.

Hints and Tips Guide

2-1