Xerox Nuvera 100 Hints en tips handleiding - Pagina 9

Blader online of download pdf Hints en tips handleiding voor {categorie_naam} Xerox Nuvera 100. Xerox Nuvera 100 18 pagina's. Production system
Ook voor Xerox Nuvera 100: Specificatieblad (2 pagina's), Functies Handleiding (34 pagina's), Handleiding voor planning (22 pagina's), Gebruikershandleiding (40 pagina's), Bedieningshandleiding (34 pagina's), Referentiehandleiding (2 pagina's), Handleiding voor planning (20 pagina's), Referentiehandleiding (42 pagina's), Snelle referentie (2 pagina's), Installatiehandleiding (2 pagina's), Aanvullende handleiding (48 pagina's), Handleiding voor planning (38 pagina's), Handleiding voor planning (16 pagina's), Referentiehandleiding (2 pagina's), Specificaties (2 pagina's), Hints en tips handleiding (18 pagina's), Aan de slag handleiding (26 pagina's), Aan de slag handleiding (30 pagina's)

New Capabilities in

Version 10.2

Software

The following is a list of new capabilities enabled with version 10.2 software:

1. The Xerox Tape Binder (XTB) is now configurable in Dual Mode (2 XTB's connected

together).

2. Disable status messages when trays are disabled. This de-clutters the status message area

when a tray is disabled.

3. Add a custom edge erase feature that can set the edge erase in the range of 0 mm to 6

mm for each of the four edges.

4. Added the ability to disable/enable a stacker (on DS3500 or BFM). This allows the user to

disable a stacker if they want to restrict jobs from going to that stacker and then re-enable

later.

5. Enable both top trays for purge events on systems with 2 top trays. This will improve

purge effectiveness.

6. Improved jam clearance by adding additional areas that can be purged to the 5B area.

7. Added several new Finisher profiles to the catalog.

Hints and Tips Guide

2-1