eControl 150 User's Installation Manual - Page 7

Browse online or download pdf User's Installation Manual for Cookers eControl 150. eControl 150 9 pages. Instaheat hob

Print Page

5. Installation Instructions

CAUTION!

Please read the Caution, Cautionary notes at the start of this section. Property damage or personal injury may occur

if the information in these instructions is not followed.

DO NOT keep or use gasoline or other flammable vapours or liquids near this or any other appliance.

A qualified installer or service agency must perform installation and service.

WARNING: This appliance must be equipped with a device that allows the Live and Neutral conductors to be

permanently disconnected. Prior to any electrical work, the appliance must be permanently disconnected from the

Supply (Live) and Neutral Conductors during installation or disconnection.

CAUTION: BECAUSE THIS UNIT IS HEAVY, ADEQUATE EQUIPMENT, TRAINING AND MANPOWER SHOULD BE USED IN

MOVING THE RANGE TO AVOID DAMAGE TO THE UNIT OR THE FLOOR OR PERSONAL INJURY.

● REMEMBER: When replacing a component on this appliance, only use spare parts that meet the safety and

performance specifications that we require.

● DO NOT USE ANY PARTS THAT HAVE NOT BEEN SPECIFICALLY APPROVED BY eControl Cookers.

PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS APPLIANCE AND KEEP IN A SAFE PLACE FOR FUTURE

REFERENCE.

Consumer protection

● As a responsible manufacturer, we ensure that our products are designed and built to meet the required

safety standards when properly installed and used.

● WARNING - ELECTRIC SHOCK HAZARD

● It is the responsibility of the customer to contact a qualified electrical installer to ensure that the electrical

installation is adequate and in accordance with the regulations.

● When cutting holes in the walls or the floor, use extreme caution. Electrical wires may be hidden behind a

wall or floor covering and, if touched, can cause an electric shock.

● Any electrical circuits affected by installation should be located before installation and disconnected from the

circuit.

● WARNING: THIS APPLIANCE MUST BE EARTHED.

● DO NOT use an extension lead with this appliance.

● The appliance is specifically designed for the voltage specified on the data plate.

● Residual Current Device (RCD) to the cooker supply circuit.

Pass on this Manual to the User and instruct them on how to use the appliance safely.