Yamaha AW2816 Operation Manual

Browse online or download pdf Operation Manual for Musical Instrument Yamaha AW2816. Yamaha AW2816 2 pages. Professional audio workstation, recording101
Also for Yamaha AW2816: Update Manual (2 pages), Tutorial (31 pages), Manual (32 pages)

Print Page

AW2816 version 1.1 adds the following functionality.

• OPTION (option slot) can now be selected as a port

for MIDI transmission and reception.

• You can now use a Plug-in page that displays the

parameters of I/O cards that are compatible with

the Mini YGDAI plug-in system.

MIDI Setup 2 page

As the port that will be used for MIDI transmission and

reception, your choices now include the Option slot as

well as the MIDI OUT/THRU connector or TO HOST

connector.

Press the [MIDI] key

MIDI Setup 2 page.

Please also refer to P.275 of the AW2816 Owner's man-

ual.

MIDI/HOST/OPTION switch

This selects the port that will be used to transmit/

receive MIDI messages. Move the cursor to this

area and press the [ENTER] key to cycle through

the following three settings.

• MIDI ............ The MIDI IN connector and MIDI

OUT/THRU connector will be

used.

• HOST .......... The TO HOST connector will be

used. The transmission speed is set

by the TO HOST setting.

• OPTION ...... The OPTION I/O slot will be used.

Tip!

The OPTION setting is valid only if an I/O card that can

transmit/receive MIDI messages (such as the mLAN

card "MY8-mLAN"; planned for availability in the near

future) is installed in option slot.

[F2] key to access the

Version 1.1

Plug-in page

Plug-in page has been added to display parameters for I/

O cards compatible with the Mini YGDAI plug-in sys-

tem. To access the Plug-in page, press the [PATCH]

[F4] key.

For details on the types of I/O cards compatible with the

Mini YGDAI plug-in system, please consult your local

distributor, or the following Internet URL.

http://www.aw2816.com/

Tip!

In the Plug-in page you can use BACKUP and RESTORE

as additional functions. For details refer to the sections

below.

Backing up an I/O card

If an I/O card compatible with the MiniYGDAI plug-in

system is installed, you can use a memory bank

(MEM.BANK) to store I/O card settings.

Scene changes on the AW2816 are linked to changes of

the I/O card settings, and when you store the scene (or

save the song), settings of the I/O card installed in

option slot will be automatically backed-up to

MEM.BANK.

However if necessary, you can also perform the backup

operation manually. The procedure is as follows.

Press the [PATCH] key

the Plug-in page.

The contents of the Plug-in page and the operating

procedure will differ depending on the I/O card

that is installed. The screen shot shown above is for

a prototype 56K DSP card manufactured by the

Waves Corporation. For details, refer to the manual

for your I/O card.

[F4] key to access