Yamaha AW2816 Update Manual

Browse online or download pdf Update Manual for Musical Instrument Yamaha AW2816. Yamaha AW2816 2 pages. Professional audio workstation, recording101
Also for Yamaha AW2816: Operation Manual (2 pages), Tutorial (31 pages), Manual (32 pages)

Print Page

• In order to perform the update procedure, you

will need an internal or external CD-RW drive

that has been confirmed by Yamaha to work

with the AW2816.

• If your AW2816 is not equipped with a CD-RW

drive compatible with the AW2816, or in case

you experience difficulty with the updating

procedure, then please contact your Yamaha

dealer. There may be a charge for upgrading the

AW2816.

Cautions for the update

procedure

• Before you begin the procedure, make sure that

the plug of the power cable has not become

loose, and that the power will not be

disconnected accidentally.

• Do not perform the update procedure if there is

a possibility that the power may fail due to a

lightning strike or other reason.

• Never turn off the power until the system update

procedure has been completed.

Update procedure

Preparations

• Be sure to make a backup of any important data

on the internal hard disk.

• If you use an external CD-RW drive, make sure

that its SCSI ID has a setting other than "6"

(which is the ID of the AW2816 itself).

• We ask that you update the system on your own responsibility.

• Incorrect operation or accidents such as power failure during

• In connection with defects of AW2816, Yamaha's liability is

Procedure for updating

the AW2816 operating system

Important!

Also, you must be sure to create a backup of any important

data before you continue with the procedure explained below.

the upgrade process may cause the AW2816 to stop operating

correctly, and may also result in damage to or loss of the

recorded data.

limited to the terms of warranty. No loss of data or damage

thereto will be Yamaha's responsibility, and the customers

accept this limitation of liability by agreeing to update

AW2816.

Using the internal CD-RW drive

1. Turn on the power of the AW2816.

2. Access the CD PLAY screen, and insert the

update CD-ROM into the CD-RW drive.

3. Access the SONG screen Shut Down page, shut

down the AW2816, and then turn off the power.

4. Hold down both the [HOME] key and the [AUX

1] key of the AW2816, and turn on the power.

At this time, do not release these two keys until

the display indicates "OS Update".

5. In approximately two minutes, the display will

show a message asking for your consent.

In this message, "Current OS Version *.**"

indicates the currently installed OS version

number, and "File OS Version *.**" indicates the

update version number that is about to be

installed.

6. After verifying the version number, press the

[ENTER] key.

The bar graph segments (***...) in the display

will light in succession from start to end.

• Approximately six minutes will be required from

when you press the [ENTER] key until the

operating system update begins.

• The intervals between each *** segment lighting

in the bar graph will be irregular in duration.

• Never turn off the power until the end ***

segment is lit!

7. When all bar graph segments (***) have lit until

the end, turn off the power of the AW2816.

When all bar graph *** segments have lit, the

system update has been completed.