Yamaha AX-497 Owner's Manual - Page 13

Browse online or download pdf Owner's Manual for Amplifier Yamaha AX-497. Yamaha AX-497 24 pages. Stereo amplifier
Also for Yamaha AX-497: Owner's Manual (23 pages), Servise Manual (36 pages)

Print Page

CONNECTIONS

Remove approximately 10 mm (318 in) of

insulation from the end of each speaker

cable and twist the exposed wires of the

cable together to prevent short circuits.

•

Connecting the banana plug

(With the exception of Asia, Korea, U.K. and

Europe models)

First, tighten the knob and then insert the banana plug into

the end of the corresponding terminal.

Unscrew the knob.

Banana plug

• One or two speaker sets can be connected to this unit. If you use

only one speaker set, connect it to either the SPEAKERS A or B

terminals.

• Use speakers with the specified impedance shown on the rear

panel of this unit.

Red: positive (+)

Black: negative (-)

Insert one bare wire into the hole in the side

of each terminal.

Red: positive (+)

Black: negative (-)

Tighten the knob to secure the wire.

Red: positive (+)

Black: negative (-)