Clarke 6480231 Original Instructions Manual - Page 10

Browse online or download pdf Original Instructions Manual for Power Tool Clarke 6480231. Clarke 6480231 17 pages. Electric drill bit sharpener

Print Page

MAINTENANCE & TROUBLESHOOTING

CHANGING THE GRINDING STONE

1. Make sure that the sharpener is switched off and disconnected from the

mains power supply.

2. Remove the four screws that hold

the head assembly in place and

remove the head assembly.

3. Remove the grinding stone

assembly.

• Make sure the spring

underneath stays in place

around the flat sided spindle.

4. Unscrew the nut from the wheel

base by turning anti-clockwise.

5. Pop out the wheel base and

washer and remove the worn

grinding stone.

6. Place new grinding stone onto

the wheel base, replace the

washer, and screw the nut back in

place.

7. Replace wheel assembly onto the unit.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]