Clarke 6480231 Orijinal Talimat Kılavuzu - Sayfa 10
Elektrikli Alet Clarke 6480231 için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Clarke 6480231 17 sayfaları. Electric drill bit sharpener
Sayfayı Yazdır
MAINTENANCE & TROUBLESHOOTING
CHANGING THE GRINDING STONE
1. Make sure that the sharpener is switched off and disconnected from the
mains power supply.
2. Remove the four screws that hold
the head assembly in place and
remove the head assembly.
3. Remove the grinding stone
assembly.
• Make sure the spring
underneath stays in place
around the flat sided spindle.
4. Unscrew the nut from the wheel
base by turning anti-clockwise.
5. Pop out the wheel base and
washer and remove the worn
grinding stone.
6. Place new grinding stone onto
the wheel base, replace the
washer, and screw the nut back in
place.
7. Replace wheel assembly onto the unit.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10