Clarke 6500010 Operating & Maintenance Instructions - Page 3

Browse online or download pdf Operating & Maintenance Instructions for Power Tool Clarke 6500010. Clarke 6500010 14 pages. Mortising machine

Print Page

CHECK for DAMAGE. Before using the machine, any damaged part, such as a guard

etc., should be checked to ensure that it will operate properly, and perform its intended

function. Check for alignment of moving parts, breakage of parts, mountings, and any

other condition that may affect the machines' operation. Any damage should be properly

repaired or the part replaced. If in doubt, DO NOT USE the machine. Consult your local

dealer.

5. DISCONNECT the MACHINE from the power supply before servicing and when changing

accessories such as blades, etc.

6. KEEP GUARDS in place and in working order.

7. ALWAYS WEAR SAFETY GOGGLES, manufactured to the latest European Safety

Standards. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses

do not have impact resistant lenses, they are NOT safety glasses.

8. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

9. ALWAYS WEAR EAR PROTECTORS/DEFENDERS.

10. DON'T FORCE the Machine. It will do a better and safer job at the rate for which it was

designed.

11.

REMOVE ADJUSTING KEYS AND WRENCHES. Form the habit of checking to see

that keys and adjusting wrenches are removed from the machine before switching on.

12. DRUGS, ALCOHOL, MEDICATION. Do not operate machine while under the influence

of drugs, alcohol or any medication.

13. USE RECOMMENDED ACCESSORIES. The use of improper accessories could be

hazardous.

14. NEVER LEAVE MACHINE RUNNING UNATTENDED. Turn power OFF. Do not leave

machine until it comes to a complete stop.

15. ALWAYS REMOVE PLUG from electrical outlet when adjusting, changing parts, or

working on machine.

16. AVOID DANGEROUS ENVIRONMENT. Don't use power machines in damp or wet

locations or expose them to rain. Keep your work area well illuminated. DO NOT USE

in explosive atmosphere (around paint, flammable liquids etc.).

17. KEEP CHILDREN AWAY. All visitors should be kept a safe distance from the work

area, especially whilst operating the unit.

18. MAINTAIN MACHINE IN TOP CONDITION. Keep tools sharp and clean for the best

and safest performance. Follow maintenance instructions.

19. DON'T OVERREACH. Keep your proper footing and balance at all times. For best

footing, wear rubber soled footwear. Keep floor clear of oil, scrap wood, etc.

20. WEAR PROPER APPAREL. Loose clothing or jewellery may get caught in moving

parts. Wear protective hair covering to contain long hair.

21. NEVER STAND ON THE MACHINE. Serious injury could occur if the machine is tipped

or if a cutting tool is accidentally contacted. Do not store materials above or near a

machine, such that it is necessary to stand on the machine to reach them.