Clarke CIWLI300 Operating & Maintenance Instructions - Page 9

Browse online or download pdf Operating & Maintenance Instructions for Power Tool Clarke CIWLI300. Clarke CIWLI300 17 pages.

Print Page

OPERATION

CAUTION: MAKE SURE THAT THE WRENCH IS FULLY OFF BEFORE

ATTACHING OR REMOVING A SOCKET. ALWAYS TAKE CARE TO USE THE

CORRECT SIZE SOCKET FOR BOLTS AND NUTS. AN INCORRECT SOCKET

WILL CAUSE DAMAGE TO THE BOLT OR NUT.

1. Align the chosen socket and

simply push it onto the anvil. Use

only ½" square drive impact

sockets supplied, or as listed on

page 11.

2. Squeeze the trigger to start the

impact wrench. Release the

trigger to stop.

1. Select the direction of operation by

pushing the selector bar in the

appropriate direction.

• The direction of rotation is shown on

the end face of the switch-bar.

• When the selector bar is in the central

position the trigger is locked.

2. Always check the direction of rotation

before operation.

1. Fit the appropriate socket to the square

drive of the wrench.

2. With the FORWARD/NEUTRAL/REVERSE

switchbar in the REVERSE running position, and holding the wrench firmly in

BOTH HANDS, pull the trigger. The nut will be impacted repeatedly until it is

loosened. IMPORTANT! Release the trigger immediately the nut begins to

loosen.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]