Zanussi FE 4000 Instructions For The Use And Care - Page 11

Browse online or download pdf Instructions For The Use And Care for Washer Zanussi FE 4000. Zanussi FE 4000 36 pages. Front-load washing machine
Also for Zanussi FE 4000: Use And Care Manual (36 pages)

Print Page

IMPORTANT

The wires in this mains lead are coloured

in accordance with the following code:

GREEN AND YELLOW - EARTH

BLUE - NEUTRAL

BROWN - LIVE

If you fit your own plug, the colours of

the wires in the mains lead of your

appliance may not correspond with the

markings identifying the terminals in

your plug, this is what you have to do:

Connect the green and yellow (earth)

wire to the terminal in the plug which is

marked with the letter «E» or the earth

—

symbol or coloured green, or green

and yellow.

Connect the blue (neutral) wire to the

terminal in the plug which is marked

with the letter «N» or coloured black.

Connect the brown (live) wire to the

terminal which is marked with the letter

«L» or coloured red.

The plug moulded on to the cord

incorporates a fuse. For replacement, use

a 13 Amp BS 1362 fuse. Only ASTA

approved fuses should be used.

The fuse cover/carrier must be replaced

in the event of changing fuse.

The right fuse cover/carrier colour is the

one shown by the coloured insert at the

base of the plug.

The plug must not be used if the fuse

cover/carrier is lost. A replacement

cover/carrier must be obtained from

Zanussi Service Agents whose addresses

are listed on the attached «Zanussi

Service Agents Nationwide».

This appliance complies with E.E.C.

directive no. 87 / 308 of 2.6.87 relative to

radio interference suppression.

For correct functioning of the washing

machine, the mains must be provided with

` a suitable earth connection.