Zanussi FE 4000 Instructions For The Use And Care - Page 13

Browse online or download pdf Instructions For The Use And Care for Washer Zanussi FE 4000. Zanussi FE 4000 36 pages. Front-load washing machine
Also for Zanussi FE 4000: Use And Care Manual (36 pages)

Print Page

D Programmer pushbutton ©

By pressing this pushbutton the 23

numbers that mark the various wash

cycles appear in sequence in the display

window. (see programme chart on

page 16-20).

If the button is pressed during the wash

cycle the display shows the number and

characteristics of the cycle in progress.

When released the remaining time before

the cycle is completed is displayed.

E Cycle display

The liquid crystal display shows the

following information:

The 23 numbers which identify the cycle

appear in the window in sequence when

the Programmer Pushbutton is pressed.

During the selection of the cycle, beside

the number which identifies the cycle,

other characters will appear when the

following buttons are pressed:

Prewash LU

Half load W3

Spin Speed 650

Once the Start Button has been pressed,

the time which it will take for the

programme to be completed is shown in

the window.

The time is being constantly reassessed

according to the water temperature and

washing conditions, and will update at

regular intervals. Please note that the

readout for the quickwash programme

does not update itself as frequently as the

rest of the programmes.

A key symbol is shown to indicate that the

washing machine door is locked. At the

end of the cycle the display shows zero.

After 1 - 2 minutes the key symbol m0

starts to flash to indicate that the door

can be opened.

Always remember to drain the water

before opening the door.