Zanussi ZWY 71054SI User Manual - Page 11
Browse online or download pdf User Manual for Washer Zanussi ZWY 71054SI. Zanussi ZWY 71054SI 21 pages.
Print PageYou can cancel or change the set of
the delay start before you touch the
button
. After touching the button
you can only cancel the delay.
To cancel the delay start:
1. Touch the button
pause.
2. Touch the button Delay Start until the indicator
of the set delay goes off.
Touch the button
programme immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Touch
.
The indicator of this button flashes.
2. Change the options.
3. Touch
again.
The programme continues.
CANCELLING A PROGRAMME
1. Press the button On/Off for some seconds to
cancel the programme and to deactivate the
appliance.
2. Press the same button again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
OPENING THE LID
While a programme or the delay start operates, the
appliance lid is locked. The indicator
CAUTION! If the temperature and
level of the water in the drum are too
high, you cannot open the lid.
To open the lid during the first minutes of the
cycle or when the delay start operates:
1. Touch the button
appliance.
1) The indicator
to set the appliance to
again to start the
is on.
to deactivate the
blinks when the lid is unlocking.
2. Wait a couple of minutes until the indicator
1)
goes off.
3. You can open the lid. If necessary add or
remove the items.
4. Close the lid and touch the button
The programme (or the delay start) continues.
The door can be open when the programme is
complete.
AT THE END OF THE PROGRAMME
•
The appliance stops automatically.
•
The acoustic signal operates (if it is activated).
•
The indicator of the button
•
The lid lock indicator
unlocking) and then goes off.
•
You can open the lid.
•
Remove the laundry from the appliance. Make
sure that the drum is empty.
•
Press the button On/Off
deactivate the appliance.
•
Close the water tap.
•
Keep the lid ajar, to prevent the mildew and
odours.
The washing programme is completed, but
there is water in the drum:
•
The drum turns regularly to prevent the creases
in the laundry.
•
The indicator
the water.
•
The lid lock indicator
button
flashes. The lid stays locked.
•
You must drain the water to open the lid.
Draining the water:
1. To drain the water.
•
Touch the button
drains the water and spins with the
maximum spin speed for selected washing
programme.
•
Alternatively, touch the button
the spin speed and then touch the button
. The appliance drains the water and
spins. If you set
drains.
2. When the programme is completed and after a
couple of minutes the lid lock indicator
goes off, you can open the lid.
3. Press the button On/Off
to deactivate the appliance.
goes off.
blinks (when the lid is
for some seconds to
flashes to remind you to drain
is on. The indicator of
. The appliance
to change
, the appliance only
for some seconds
again.
11