Zanussi ZWY 71054SI Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar roupa Zanussi ZWY 71054SI. Zanussi ZWY 71054SI 21 páginas.

Imprimir página

You can cancel or change the set of

the delay start before you touch the

button

. After touching the button

you can only cancel the delay.

To cancel the delay start:

1. Touch the button

pause.

2. Touch the button Delay Start until the indicator

of the set delay goes off.

Touch the button

programme immediately.

INTERRUPTING A PROGRAMME AND

CHANGING THE OPTIONS

You can change only some options before they

operate.

1. Touch

The indicator of this button flashes.

2. Change the options.

3. Touch

again.

The programme continues.

CANCELLING A PROGRAMME

1. Press the button On/Off for some seconds to

cancel the programme and to deactivate the

appliance.

2. Press the same button again to activate the

appliance. Now, you can set a new washing

programme.

Before starting the new programme

the appliance could drain the water. In

this case, make sure that the detergent

is still in the detergent compartment, if

not fill the detergent again.

OPENING THE LID

While a programme or the delay start operates, the

appliance lid is locked. The indicator

CAUTION! If the temperature and

level of the water in the drum are too

high, you cannot open the lid.

To open the lid during the first minutes of the

cycle or when the delay start operates:

1. Touch the button

appliance.

1) The indicator

to set the appliance to

again to start the

is on.

to deactivate the

blinks when the lid is unlocking.

2. Wait a couple of minutes until the indicator

goes off.

3. You can open the lid. If necessary add or

remove the items.

4. Close the lid and touch the button

The programme (or the delay start) continues.

The door can be open when the programme is

complete.

AT THE END OF THE PROGRAMME

•

The appliance stops automatically.

•

The acoustic signal operates (if it is activated).

•

The indicator of the button

•

The lid lock indicator

unlocking) and then goes off.

•

You can open the lid.

•

Remove the laundry from the appliance. Make

sure that the drum is empty.

•

Press the button On/Off

deactivate the appliance.

•

Close the water tap.

•

Keep the lid ajar, to prevent the mildew and

odours.

The washing programme is completed, but

there is water in the drum:

•

The drum turns regularly to prevent the creases

in the laundry.

•

The indicator

the water.

•

The lid lock indicator

button

flashes. The lid stays locked.

•

You must drain the water to open the lid.

Draining the water:

1. To drain the water.

•

Touch the button

drains the water and spins with the

maximum spin speed for selected washing

programme.

•

Alternatively, touch the button

the spin speed and then touch the button

. The appliance drains the water and

spins. If you set

drains.

2. When the programme is completed and after a

couple of minutes the lid lock indicator

goes off, you can open the lid.

3. Press the button On/Off

to deactivate the appliance.

goes off.

blinks (when the lid is

for some seconds to

flashes to remind you to drain

is on. The indicator of

. The appliance

to change

, the appliance only

for some seconds

again.