Zanussi DTI 6759 E Instruction Booklet - Page 6

Browse online or download pdf Instruction Booklet for Dishwasher Zanussi DTI 6759 E. Zanussi DTI 6759 E 27 pages. Dishwasher dti 6759 e

Print Page

The control panel

In this fully integrated appliance the controls are

located on the top of the door. When selecting a

programme, the door needs to be partially opened.

Audible signals have been introduced to help

indicate which operations the dishwasher is

performing.

Short "instruction accepted" signal

When any of the buttons are pressed: a short

audible signal informs you that the machine has

accepted the instruction given.

Long "programme run" signal

A continuous audible signal lasting about one

second, heard only when you close the dishwasher

door, informs you that the washing programme is

starting.

Intermittent "end of programme" signal

An intermittent audible signal, lasting in total five

seconds, informs you that the wash programme

has ended.

If you wish to deactivate these audible signals,

press both the "Economy drying" and "Delayed

start" programme buttons together for about 3

seconds, until three short signals are heard.

SO214

To reactivate the audible signals, press both

buttons together again for about 3 seconds, until

the "short instruction accepted" signal is heard.

2 3 4

5 6 7 8

1. "On/Off" pushbutton

Press this button to preset the dishwasher to

accept settings (selection of wash programme,

economy drying, etc.).

The number "1" corresponding to the first

selectable programme (Rinse and Hold)

appears in the digital display.

When the wash programme has ended, the

dishwasher stops automatically (an intermittent

audible signal lasting about 5 seconds informs

you of this) and a flashing horizontal line

appears in the digital display.

To switch off the dishwasher at the end of the

programme, press this button again.

2. Salt refill indicator light

This light illuminates when the salt container

needs refilling.

3. Digital display

4. "Programme selector" button

To select the required programme, press this

button until the number corresponding to the

chosen programme appears in the digital

display (see "Washing programmes" chart).

5. "Economy drying" button

When this button is pressed, the last rinse is

not heated, with a significant saving in electrical

energy.

The corresponding pilot light comes on.

If the pilot light is not on, the water of the

last rinse will always be heated up to 65°C.

PCP11/1GB