Zanussi ZDTS102 User Manual - Page 12

Browse online or download pdf User Manual for Dishwasher Zanussi ZDTS102. Zanussi ZDTS102 20 pages.

Print Page

To remove filters B and

C, turn the handle ap-

proximately 1/4 anti-

clockwise.

What to do if...

The appliance does not start or stops during operation.

If there is a fault, first try to find a solution to the problem

yourself. If you cannot find a solution to the problem

Fully clean the filters A, B

and C below running wa-

ter.

Remove the flat filter A

from the bottom of the ap-

pliance.

Put the filter system in

position. To lock the filter

system, turn the handle

clockwise until it locks in

position.

Important! Do not remove the spray arms.

If the holes in the spray arms become clogged, remove

remaining parts of soil with a cocktail stick.

Clean the external surfaces of the appliance and con-

trol panel with a damp soft cloth. Only use neutral de-

tergents. Do not use abrasive products, scouring pads

or solvents (acetone, trichloroethylene etc...).

Frost precautions

Caution! Do not install the appliance where the

temperature is below 0 °C. The manufacturer is

not responsible for damage because of frost.

If not possible, empty the appliance and close the door.

Disconnect the water inlet hose and remove water from

the water inlet hose.

yourself, contact your dealer or the Service Force Cen-

tre.