Zanussi ZDTS102 User Manual - Page 7

Browse online or download pdf User Manual for Dishwasher Zanussi ZDTS102. Zanussi ZDTS102 20 pages.

Print Page

3. Press and hold the programme selection/cancel

button.

4. Release the programme selection/cancel button

when programme indicator light A starts to flash

and programme indicator light B comes on.

5. Wait until programme indicator light B goes off.

– Programme indicator light A starts to flash.

– The end indicator light starts to flash.

6. Press the programme selection/cancel button one

time.

– Programme indicator light A starts to flash.

Use of dishwasher salt

Caution! Only use dishwashers salt. Types of

salt that are not applicable for dishwashers cause

damage to the water softener.

Fill the salt container with

1 litre of water (only the

first operation).

Caution! Only use branded rinse aid for

dishwashers.

Do these steps to fill the rinse aid dispenser:

– The setting function of the water softener is ac-

tivated.

– The end indicator light flashes to show the level

of the water softener.

Example: 5 flashes, pause, 5 flashes, pause,

etc... = level 5.

7. Press the programme selection/cancel button one

time to increase the water softener level by one

step.

8. Press the on/off button to save the operation.

It is normal that water overflows from the salt

container when you fill it with salt.

Make sure that there is no grain of salt outer of

the salt compartment. Salt which stays on the

tank for a while drills the tank. It is recommended to

start a washing programme immediately after you fill

the salt container. This prevents of corrosion because

of spilled salt.

When you set electronically the water softener to level

1, the salt indicator light does not stay on.