Zanussi ZDTS401 User Manual - Page 12
Browse online or download pdf User Manual for Dishwasher Zanussi ZDTS401. Zanussi ZDTS401 20 pages.
Print Page
3
Fill the detergent dis-
penser (A) with deter-
gent.
Multitab function
The multitab function is for combi detergent tablets.
These tablets contain agents such as detergent, rinse
aid and dishwasher salt. Some types of tablets can
contain other agents.
Do a check if these tablets are applicable for the local
water hardness. Refer to the instructions from the man-
ufacturer.
When you set the multitab function, it stays on until you
deactivate it.
The multitab function stops automatically the flow of
rinse aid and salt. The rinse aid indicator light and salt
indicator light are deactivated.
The programme duration can increase if you use the
multitab function.
Activate or deactivate the multitab function before
the start of a washing programme.
You cannot activate or deactivate the multitab function
when the programme operates. Cancel the washing
programme, then set the programme again.
To activate the multitab function:
• Press the multitab button. The multitab indicator light
comes on.
To deactivate the multitab function:
• Press the multitab button. The multitab indicator light
goes off.
Do these steps if the drying results are not
satisfactory:
1. Fill the rinse aid dispenser with rinse aid.
12
4
If you use a washing pro-
gramme with prewash
phase, put more deter-
gent in the prewash de-
tergent compartment (B).
5
Different brands of detergent dissolve in different
times. Some detergent tablets do not have the
best cleaning results during short washing pro-
grammes. Use long washing programmes when you
use detergent tablets to fully remove the detergent.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position 2.
• You can only activate or deactivate the rinse aid
dispenser when the multitab function is activated.
To activate/deactivate the rinse aid dispenser:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C.
– The indicator lights for function buttons A, B, and
C start to flash.
4. Press function button B.
– The indicator lights for function buttons A and C
go off.
– The indicator light for function button B contin-
ues to flash.
– The digital display shows the setting.
5. Press function button B again.
– The digital display shows the new setting.
6. Switch off the appliance to save the operation.
6
Rinse aid dispenser de-
activated
Rinse aid dispenser acti-
vated