Zanussi ZEV6331BBA User Manual - Page 11
Browse online or download pdf User Manual for Hob Zanussi ZEV6331BBA. Zanussi ZEV6331BBA 17 pages.
Print Page
WHAT TO DO IF...
Problem
You cannot activate or operate
the hob.
An acoustic signal sounds and
the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
The hob deactivates.
Residual heat indicator does
not come on.
You cannot activate the outer
ring.
There is a dark area on
the multiple zone.
The sensor fields become hot.
comes on.
comes on.
Possible cause
The hob is not connected to an
electrical supply or it is con-
nected incorrectly.
The fuse is blown.
You touched 2 or more sensor
fields at the same time.
There is water or fat stains on
the control panel.
You put something on one or
more sensor fields.
You put something on the sen-
sor field
.
The zone is not hot because it
operated only for a short time.
It is normal that there is a dark
area on the multiple zone.
The cookware is too large or
you put it too near to the con-
trols.
Automatic Switch Off oper-
ates.
The Child Safety Device func-
tion operates.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connection
diagram.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Activate the hob again and set
the heat setting in less than 10
seconds.
Touch only one sensor field.
Clean the control panel.
Remove the object from the
sensor fields.
Remove the object from the
sensor field.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
Activate the inner ring first.
Put large cookware on the rear
zones if possible.
Deactivate the hob and acti-
vate it again.
Refer to "Daily use" chapter.
11