Zanussi ZEV6331BBA User Manual - Page 12
Browse online or download pdf User Manual for Hob Zanussi ZEV6331BBA. Zanussi ZEV6331BBA 17 pages.
Print Page
Problem
and a number come on.
E6 comes on.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
TECHNICAL DATA
RATING PLATE
Model ZEV6331BBA
Typ 60 HAD 20 AO
Ser.Nr. .................
ZANUSSI
COOKING ZONES SPECIFICATION
Cooking zone
Left front
Left rear
Right front
For optimal cooking results use cookware not larger
than the diameter of the cooking zone.
12
Possible cause
There is an error in the hob.
The second phase of the pow-
er supply is missing.
Nominal Power (Max heat setting)
[W]
1800
1200
1700 / 2700
Disconnect the hob from the
electrical supply for some time.
Disconnect the fuse from the
electrical system of the house.
Connect it again. If
on again, speak to an Author-
ised Service Centre.
Check if the hob is correctly
connected to the electrical
supply. Remove the fuse, wait
one minute, and insert the fuse
again.
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
PNC 949 492 204 01
220 - 240 V 50 - 60 Hz
Made in Romania
5.7 kW
Cooking zone diameter [mm]
180
145
210 / 270
Remedy
comes