Zanussi ZGF 759 Instruction Booklet - Page 11

Browse online or download pdf Instruction Booklet for Hob Zanussi ZGF 759. Zanussi ZGF 759 14 pages. Gas hob

Print Page

Fitting the hob to the worktop

Carry out the building in of the hob as follows:

• put the seals supplied with the hob, on the

edges of the cut out: place them exactly on

the front and rear edge and at 50 mm. from

the side edges, as shown in the diagram, taking

care that the seals meet without overlapping;

• place the hob in the cut out, taking care that it

is centred;

• fix the hob with the relevant fixing clamps

and screws, as shown in the diagram. When

the screws have been tightened, the excess

seal can be removed.

The edge of the hob forms a double seal which

prevents the ingress of liquids.

FO 2039

FO 0199

Seal