Zanussi ZGF 759 Instruction Booklet - Page 9

Browse online or download pdf Instruction Booklet for Hob Zanussi ZGF 759. Zanussi ZGF 759 14 pages. Gas hob

Print Page

Installation

IMPORTANT

This appliance must be installed by qualified

personnel.

The manufacturer will not accept liability,

should the above instructions or any of the

other safety instructions incorporated in

this book be ignored.

On the end of the shaft (A) , which includes the GJ 1/

2" threaded elbow, an adjustable joint is fixed so that

the washer (B) is fitted between the components as

shown in the diagram.

A drop of paint at both edges of the "L" joint (C) will

evidence that the good seal of the connection has

been tested in the factory.

Before connecting the gas supply pipe to the joint

(C), the installer will ensure that the paint drop is

unbroken and the "L" connector has not been moved

by the vibrations during handling and transportation.

When the final connection has been made, it is

essential that a thorough leak test is carried out on the

hob and installation.

Ensure that the main connection pipe does not exert

any strain on the hob.

Cut Out Size

The dimensions of the cut-out are given in the

diagram.

FO 1010

A) End of shaft with nut

B) Washer

C) Adjustable joint

Rectangular cut-out size for hob

Dimensions are given in mm.

FO 2038

560

150 min