Zanussi ZGG65414 User Manual - Page 11

Browse online or download pdf User Manual for Hob Zanussi ZGG65414. Zanussi ZGG65414 16 pages.
Also for Zanussi ZGG65414: User Manual (16 pages), User Manual (21 pages), User Manual (16 pages)

Print Page

• This appliance is supplied with a mains

cable. It has to be supplied with a correct

plug which can hold the load that the rating

plate rates. Make sure that you install the

plug in a correct socket.

• Always use a correctly installed shockproof

socket.

• Make sure that there is an access to the

mains plug after the installation.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• There is a risk of fire when the appliance is in

connection with an extension cable, an

adapter or a multiple connection. Make sure

that the ground connection agrees with the

standards and regulations.

• Do not let the power cable to heat up to a

temperature higher than 90° C.

Make sure that you connect the blue

neutral cable to the terminal with a

letter "N" on it. Connect the brown

(or black) phase cable to the

terminal which has a letter "L". Keep

the phase cable connected at all

times.

Connection cable

To replace the connection cable use only the

special cable or its equivalent. The cable type

is: H05V2V2-F T90.

Make sure that the cable section is applicable

to the voltage and the working temperature. The

yellow / green earth wire must be approximately

2 cm longer than the brown (or black) phase

wire.

Building In

min. 100 mm

min. 55 mm

30 mm

www.zanussi.com

A) supplied seal

B) supplied brackets

Possibilities for insertion

The panel installed below the hob must be easy

to remove and let an easy access in case a

technical assistance intervention is necessary.

Kitchen unit with door

min. 650 mm

560 mm

A) Removable panel

B) Space for connections

10 mm

3 mm

CAUTION!

Install the appliance only on a

worktop with flat surface.

60 mm

11 mm

30 mm

min 20 mm

(max 150 mm)