Zanussi ZRB934FW2 User Manual - Page 11
Browse online or download pdf User Manual for Freezer Zanussi ZRB934FW2. Zanussi ZRB934FW2 16 pages. Fridge freezer
Print Page
4.
Tighten again the screws.
4
Levelling
When placing the appli-
ance ensure that it stands
level. This can be achieved
by two adjustable feet at
the bottom in front.
Electrical Connection
Caution! Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Warning! This appliance must be earthed.
The manufacturer declines any liability should these
safety measures not be observed.
www.zanussi.com
2
1
3
A
Important! The wires in the mains lead are coloured in
accordance with the following code:
A
Green and Yellow:
C Brown:
D Blue:
As the colours of the wires in the mains lead of this appli-
ance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
1.
Connect the wire coloured green and yellow to the
terminal marked either with the letter "E" or by the
earth symbol
or coloured green and yellow.
2.
Connect the wire coloured blue to the terminal either
marked with the letter "N" or coloured black.
3.
Connect the wire coloured brown to the terminal ei-
ther marked with the "L" or coloured red.
4.
Check that no cut, or stray strands of wire is present
and the cord clamp E is secure over the outer sheath.
5.
Make sure the electricity supply voltage is the same
as that indicated on the appliance rating plate.
6.
Switch on the appliance.
The appliance is supplied with a 13 amp plug fitted B. In
the event of having to change the fuse in the plug sup-
plied, a 13 amp ASTA approved (BS 1362) fuse must be
used.
Warning! A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard. Ensure
that it is disposed of safely.
B
C
D
E
Earth
Live
Neutral
11