Zanussi ZHC 935 Instruction Booklet - Page 11

Browse online or download pdf Instruction Booklet for Ventilation Hood Zanussi ZHC 935. Zanussi ZHC 935 20 pages. Cooker hood
Also for Zanussi ZHC 935: Instruction Booklet (19 pages), Instruction Booklet (20 pages)

Print Page

Please ensure that when the appliance is

installed it is easily accessible to an engineer

in the event of a breakdown.

All installations must comply with the local

authorities requirements for the discharge

of exhaust air.

Incorrect installation may affect the safety

of this cooker hood.

Installation Requirements

Before installation check that the wall to

which the cooker hood is to be fitted for

electric cables, water pipes and gas.

Unpacking

Before unpacking the cooker hood position the

carton with the arrows pointing upwards as

illustrated on the carton.

Ref: Qty: Product Components

1 No

Canopy complete with:

Controls, Lighting, Fan Assembly,

Grease Filter, Charcoal Filter.

1 No

Telescopic Chimney comprising:

2.1

1 No

Upper Chimney Stack

2.2

1 No

Lower Chimney Stack

1 No

Right-Hand Recirculation grille

1 No

Left-Hand Recirculation grille

1 No

Ø150-120 Ducting Spigot

1 No

Ducting Extension Pipe

14.1

2 No

Recirculation Outlet Extentions

1 No

Recirculation Outlet Adapter

Ref: Qty: Installation Components

7.2.1

2 No

Upper Chnimey Fixing Brackets

12c

6 No

Chimney Fixing Screws

2.9x6.5mm

Ref: Qty: Documents

1 No

Instruction Booklet

1 No

Guarantee Card

1 No

Questionnaire

INSTALLING THE COOKER HOOD

This cooker hood is designed to be fixed to any

vertical surface over a cooking area, and can be

used in the extraction (ducted to the outside) or

recirculation mode.

The installation work must be undertaken by a

qualified and competent person.

The manufacturer disclaims any responsibility for

damage due to incorrect installation of the cooker

hood or if the hood is not installed in compliance

with relevant regulations controlling this type of

installation.

2.1

2.2

14.1

7.2.1

12c